Hacking Services in Singapore — Wall, Floor & Tile Hacking Contractor
Looking for hacking services in Singapore that start your renovation on the right footing? Hacking is renovation demolition—controlled removal of walls, floors, tiles, and fixtures so your next trade can build cleanly. SB Hacking & Painting delivers permit-aware strip-outs for HDB and BTO flats, condominiums, landed homes, offices, and retail units, with dust control, haulage, and tidy handover to tilers, carpenters, and M&E teams.
As a BCA-registered, HDB-approved hacking contractor, we work to approved drawings—not guesswork. Whether you need wall hacking Singapore homeowners request for open kitchens, floor hacking Singapore bathrooms need before waterproofing, or selective breakout in an office, we programme noise control, site protection, and debris removal around your renovation timeline and building rules.
Last updated: July 2026
BCA · HDB
Registered & HDB-approved
300+
Projects completed
24–48h
Typical quote turnaround
Why work with us
Why choose SB Hacking & Painting
You are shortlisting a hacking contractor Singapore homeowners and designers can trust with the first trade of a renovation. Here is what sets our team apart when permits, dust, and programme all matter.
BCA-registered & HDB-approved
Building and Construction Authority registration plus approval for HDB hacking works—so flat renovations start on a compliant footing.
- HDB hacking contractor ref. HB-02-5913Z — cross-check on HDB’s official listings.
- BCA registration supports regulated works; we execute only to the approved hacking scope.
- Permit conditions, permitted working hours, and estate rules are built into how we run the site.
Direct hacking contractor
The crew that quotes is the crew that hacks—no middleman subcontracting your wall or floor strip-out.
- One accountable team from site assessment through breakout and debris staging.
- Itemised quotes you can compare fairly against other hacking contractors in Singapore.
- Clear WhatsApp updates so designers and homeowners know what was removed each day.
One team: hack → haul → reinstate → paint
Most competitors stop at breakout. We can carry the same project through haulage, reinstatement, and painting under one roof.
- Fewer coordination gaps between the first trade and final finishing.
- Same dust, corridor, and access discipline from strip-out to make-good.
- Useful for office exits and full-flat renovations where programme risk is high.
Permit-aware, tidy handover
We work to the approved plan, document what was removed, and leave edges ready for the next trade.
- Dust barriers, vacuum-assisted practice, and corridor protection in high-density housing.
- Same-day debris staging with bundled haulage so rubble does not block tilers.
- Photos and marked-up notes for waterproofing, carpentry, and M&E follow-on.
Services in detail
Our hacking services
Room-by-room scopes we quote often—wall, floor, tile, kitchen, and selective hacking—each delivered by the same crew that handles protection, haulage, and handover documentation on your site.
Wall Hacking Singapore
Wall hacking Singapore projects strip finishes and non-structural elements so your designer can re-line, re-box, or open spaces safely. Below is how we typically scope kitchen, wet areas, living zones, and the compliance pieces around the actual breaking works.
Kitchen wall hacking
- Removal of wall tiles and backing where specified
- Dismantling of wall-hung kitchen cabinets and tall units
- Breakout around countertops and hob zones for layout changes
Kitchen walls carry heavy services—water, gas, power—and tight junctions with cabinets and countertops. We sequence tile and carpentry removal so services stay identifiable for your plumber and electrician, and we leave edges ready for waterproofing or new substrate without unnecessary damage to what remains.
Bathroom and toilet wall hacking
- Hacking of wall tiles and trims in WC and shower areas
- Dismantling of toilet bowls, basins, and wall-hung accessories where in scope
- Removal of door sets and frames when the layout is being reconfigured
Wet rooms need disciplined strip-out: isolating live pipes where possible, controlling water ingress during works, and planning debris paths that do not track grit through the rest of the unit. We align to your approved drawings and typical HDB or condo renovation rules so the next trade inherits a clean, inspectable substrate.
Living room and bedroom wall hacking
- Opening or removal of non-structural partition walls where permitted
- Hacking of hollow block or non-reinforced concrete (non-RC) walls within approved scope
- Making-good edges for plasterers after controlled breakout
Living and sleeping zones often combine partition removal with feature walls or wardrobe runs. We work strictly to engineer-approved limits for non-RC and lightweight walls, call out anything that needs a formal assessment, and keep breakout neat so your carpenter or drywaller can set out from true lines.
Additional wall hacking support
- Coordination with your designer on HDB hacking permit expectations
- Haulage and debris clearance aligned to estate access rules
- Corridor, lift lobby, and in-unit protection before breaking starts
Paperwork, protection, and disposal are part of a professional hacking programme—not extras bolted on at the end. We help you understand what the permit covers, how debris will move out of the unit, and how we keep common areas presentable so MCST and neighbours see a controlled operation.
Floor Hacking & Screed Removal
Floor hacking Singapore work removes existing tiles, cement screed where required, and skirting so your tiler or floor specialist can start on a predictable base. We tailor depth and method to the room, the substrate, and what your renovation drawings specify—including waterproofing build-ups and falls to the floor trap.
Kitchen floor hacking
- Removal of floor tiles and adhesive beds
- Lift-off of floor skirting and edge trims
- Controlled breakout around cabinet plinths and service penetrations
Kitchen floors see spills, dropped pans, and repeated washing—old tiles often sit on thick beds. We remove finishes without chasing deeper than your programme needs, protect adjoining rooms from dust migration, and stage rubble so haulage can clear the same day when volume allows.
Bathroom and toilet floor hacking
- Hacking of floor tiles and waterproofing build-ups where specified
- Careful work at floor wastes, thresholds, and shower channels
- Preparation for new falls and waterproofing systems
Bathroom floors tie directly to waterproofing and falls to the floor trap. We strip in a way that preserves structural falls where they must remain, document what was removed for your waterproofing contractor, and keep wet slurry contained so bedrooms and corridors outside stay usable during the strip-out phase.
Living room and bedroom floor hacking
- Removal of floor tiles and skirting in living and sleeping areas
- Consistent levels at door thresholds between rooms
- Edge detail ready for new timber, vinyl, or large-format tiles
Open-plan flows mean floor finishes need to meet cleanly at transitions. We pay attention to height differences between rooms, minimise over-break at partition lines, and leave perimeters straight so your installer can hide expansion and profiles without awkward packers.
Additional floor hacking support
- Support on HDB hacking permit alignment for floor works
- Bagging, trolley routes, and disposal timed to your programme
- Floor protection at lifts and common corridors before works intensify
Floor hacking generates sustained debris and noise. We book disposal capacity, align with permitted hours, and set down protection before grinders and breakers ramp up—so your renovation stays coordinated with management offices and the trades that follow.
Tile Hacking & Removal
Tile hacking Singapore and tile removal Singapore are often the first step before re-tiling or overlay. We lift bathroom and kitchen wall and floor tiles with controlled methods that minimise unnecessary substrate damage—so waterproofing and new tiling can start without chasing avoidable repairs.
Bathroom & kitchen tile removal
- Wall and floor tiles lifted in wet areas as specified on drawings
- Trims, adhesives, and edge details cleared for a clean set-out
- Substrate left inspectable for waterproofing or overlay systems
Many clients need tile hacking only—without full partition removal. We scope tile beds carefully, protect adjoining finishes, and stage broken tiles for haulage so the next trade is not waiting on debris clearance.
Prep for re-tiling or overlay
- Minimal over-break beyond the approved tile zone
- Notes on substrate condition handed to your tiler
- Optional bundling with floor or wall hacking in the same visit
Whether you are refreshing a single WC or stripping a full kitchen splashback, we keep edges predictable. That reduces patch-up cycles and helps your renovation contractor hold the programme after the hacking phase.
Kitchen & Wet-Area Dismantling
Kitchen hacking and bathroom strip-outs succeed when cabinets, countertops, and wall finishes come down in the right order. We dismantle wet-area fittings with attention to live services so plumbers and electricians inherit a readable site.
Kitchen dismantling
- Cabinets, tall units, and countertops removed as scoped
- Backsplash and wall finishes sequenced with service isolation
- Debris staged clear of the next carpentry or tiling set-out
Kitchen hacking Singapore homeowners request often combines wall tiles, floors, and carpentry in one visit. We label what stays live versus what is isolated, and we keep dust barriers toward living rooms when the rest of the flat is still occupied.
Bathroom & WC strip-out
- Basins, bowls, and accessories dismantled where in scope
- Door sets and frames removed for layout changes
- Water-ingress risk managed during the open strip-out window
Bathroom hacking contractor scopes need sequencing that leaves at least one usable WC when you request phased works. We discuss that trade-off up front so daily living stays realistic during renovation.
Selective & Partial Hacking
Selective hacking Singapore means interior demolition limited to what your drawings call out—tiles, carpentry, partition walls, or minor concrete elements—while structure, services, and common property stay protected. Boundaries are marked before tools start.
Drawings-led breakout
- Hack zones marked against approved plans before breaking
- Services locations confirmed to reduce surprise conduit damage
- Agreement on how far finishes are stripped before wet works begin
Selective demolition is not a generic template. Residential clients often combine wall and floor hacking with kitchen dismantling; commercial clients may need after-hours noise windows or phased strip-outs. We write the method to your site—not the other way around.
Partial & phased packages
- One room or one wall at a time when programme demands it
- Non-load bearing wall hacking within engineer-approved limits
- Partition wall hacking for open layouts without touching structure
Interior wall removal Singapore projects succeed when everyone agrees what stays. If something looks structural or sits outside the permit, we stop and escalate—illegal hacking is never worth the fine or forced reinstatement.
Coverage
Hacking for every property type
Rules, access, and noise windows differ by building. Our hacking services Singapore coverage adapts protection and sequencing for HDB, condo, landed, and commercial sites island-wide.
HDB & BTO flats
As an HDB hacking contractor we work within permit limits: no load-bearing walls, columns, bomb shelter walls, or AC ledge hacking. Open-kitchen BTO layouts and resale strip-outs are common—approval windows are typically 3–7 working days once submitted correctly.
Condominiums
Condo wall hacking and floor works follow MCST renovation rules, PE endorsement where required, lift bookings, and stricter noise windows. We plan corridor protection so management sees a controlled operation.
Landed homes
Larger interior demolition scopes, driveway access for heavier rubble, and more flexibility on sequencing—still executed as selective hacking to your drawings, not indiscriminate breakout.
Office & retail
Commercial hacking Singapore tenants need for fit-outs or end-of-lease strip-outs, often after-hours. We phase works and can continue into reinstatement works when landlords require make-good.
Pricing
Hacking cost in Singapore — price guide
Hacking cost Singapore quotes vary because material hardness, floor level, lift access, and disposal volume differ by unit. The ranges below are indicative market figures for planning—not fixed prices sight-unseen. A photo survey or site visit locks the line items. Wall hacking cost Singapore and HDB hacking cost sit in the same bands once access and protection are equal.
| Scope | Indicative range | Notes |
|---|---|---|
| Overall rate by material & access Harder screed, RC edges, and high-rise haul push toward the upper end | $3–$8 psf | Harder screed, RC edges, and high-rise haul push toward the upper end |
| Single non-load-bearing / partition wall Length, height, and finish type drive the band | ~$400–$1,200 | Length, height, and finish type drive the band |
| Bathroom / kitchen tile hacking (per wet area) Tile removal cost Singapore for walls + floors in one room | ~$800–$1,800 | Tile removal cost Singapore for walls + floors in one room |
| Full HDB floor strip (typical 3–4 room) Floor hacking cost rises with screed depth and skirting extent | ~$1,500–$3,500 | Floor hacking cost rises with screed depth and skirting extent |
| Whole-flat strip-out Walls, floors, kitchen, and fixtures—scope dependent | $3,000–$8,000+ | Walls, floors, kitchen, and fixtures—scope dependent |
| Debris haulage Often bundled with hacking so rubble leaves the same day | Quoted per load | Often bundled with hacking so rubble leaves the same day |
What moves the hacking price list Singapore figure
- Material hardness — cement screed and concrete breaking cost more than thin tile beds
- Floor level and lift access — high-rise service lifts add labour and time
- Protection level — corridor, lobby, and neighbour-sensitive dust barriers
- Disposal volume — construction waste tonnage and number of haulage trips
- Permits and after-hours — HDB windows vs condo or commercial night works
All figures are indicative ranges for budgeting. Final hacking services Singapore pricing is confirmed after we review plans, photos, and site access. We do not publish a single fixed rate because every unit differs.
How it works
Our hacking process
A clear sequence from plans to swept handover—so hacking services in Singapore stay predictable for homeowners, designers, and main contractors alike.
- Step 1
Step 1
Send plans & photos
Share floor plans with hack zones, photos of finishes, and building type. We return an itemised quote within 24–48 hours for most residential scopes.
- Step 2
Step 2
Permit alignment & scheduling
Your ID or contractor coordinates the HDB renovation permit; we align method, hours, and start date to the approved scope and estate rules.
- Step 3
Step 3
Site protection
Corridor, lift lobby, and in-unit dust barriers go up before jackhammers or grinders start—noise control and neighbour impact stay managed.
- Step 4
Step 4
Controlled hacking
Breakout within permitted working hours (typically 9am–5pm weekdays; Saturdays often to 1pm; none on Sundays and public holidays for HDB).
- Step 5
Step 5
Debris staging & haulage
Rubble is bagged and staged the same day where volume allows, then cleared via NEA-approved disposal routes so the flat stays walkable.
- Step 6
Step 6
Swept handover
Edges swept to a tidy baseline, with photo documentation and live-services notes for your tiler, waterproofing crew, or carpenter.
HDB hacking permits & rules
Do you need a permit to hack an HDB wall? Yes—approved HDB hacking typically requires an HDB renovation permit and must follow the approved plan. Your interior designer or licensed contractor usually coordinates submission; as an HDB hacking permit contractor we execute strictly to that permitted scope. Approval commonly takes about 3–7 working days when documents are in order. Permit validity and conditions are printed on the approval—we schedule within those windows.
Permitted working hours for typical HDB hacking are 9am–5pm on weekdays and often 9am–1pm on Saturdays, with no noisy hacking on Sundays and public holidays. What can never be hacked without proper structural approval: load-bearing walls, structural columns, bomb shelter walls, and AC ledges. Illegal hacking can bring fines of up to $5,000 plus forced reinstatement—expensive compared with doing it correctly the first time.
Private condominiums follow MCST rules and may need PE endorsement. Commercial sites follow landlord and Building and Construction Authority expectations. We adapt protection, noise control, and haulage to each building—not a one-size method statement.
How we run the site day to day
Before cutting or breaking starts, we confirm sequence: which rooms first, where debris stacks, and how materials move to the lift or yard. During hacking, enclosures and vacuum-assisted practices reduce dust migration; after each phase, edges are swept back to a tidy baseline for your next subcontractor.
Good handover documentation—photos, marked-up plans, and notes on what remains live—helps avoid disputes between trades and keeps your main contractor’s programme credible. That habit is part of every job, not an optional extra.
Wall hacking versus structural work
Not every wall can be removed on aesthetic grounds. Load-bearing walls, reinforced zones, bomb shelter walls, and building-specific constraints require professional assessment. We follow the scope your qualified person or engineer approves and flag practical risks early—concealed conduits, shared walls, or unusual substrates—so approvals and site work stay in sync. We never promise we can remove structural walls or guarantee HDB or PE approval outcomes; we execute to the approved plan only.
Proof
Recent hacking projects
Proof beats claims. These snapshots mirror typical scopes we deliver—see more on our projects page.
HDB · Eastern Singapore
HDB kitchen & partition strip-out
Wall and floor tile hacking, cabinet dismantling, coordinated debris clearance ahead of a full kitchen remodel.
About 3–4 working days
Private condominium
Condo bathroom wet-area hacking
Controlled WC wall and floor tile hacking with dust containment so remaining bathrooms stayed usable.
About 1–2 working days
HDB BTO
BTO floor tile hacking
Full-unit floor hacking including skirting; substrate left even for large-format tile installation.
About 2–3 working days
Reviews
What customers say
Named feedback from recent jobs across Singapore—read more customer reviews on our reviews page.
Wall hacking for our BTO was done neatly and on schedule. They explained what could and could not be touched, and the site was left in good shape for our contractor to take over.
Rachel T.
BTO flat · wall hacking
We needed kitchen and floor hacking before tiling. Communication was clear, pricing transparent, and the team took care to protect the corridors and lift lobby during haulage.
Priya N.
HDB · kitchen & floor hacking
Good experience engaging SB Hacking & Painting. The team is friendly, knowledgeable and detailed in how they plan to do the works. The work done is good and dust was kept to minimal level.
Eng S Lee
Residential hacking
Full pathway
One contractor: hack → haul → reinstate → paint
No competitor in this niche can honestly offer all four under one BCA-registered team. For broader interior strip-out searches, see our demolition contractor Singapore page—then keep the same crew through haulage, reinstatement, and paint.
- 01demolition contractor SingaporeInterior and selective demolition cluster—sibling page so hacking and demolition keywords stay cleanly separated.
- 02haulage and disposalSame-day debris staging and construction waste clearance so tilers inherit a walkable floor.
- 03reinstatement worksOffice and retail make-good after strip-out—partitions, ceilings, and presentation for landlord checks.
- 04painting servicesPrep-first interior painting after patch-up, or a standalone refresh when hacking is complete.